WarmArp MwPb EC by Edmundo Cassis
Oscillator 1 timbre
Only sawtooth oscillators are enabled, resulting in a harmonically rich content.
Oscillator 2 timbre
Volume level for oscillator 2 is set to 70 and is modulated by Mod Wheel.
Mod Wheel mod-matrix 1 modulation amount for volume level for oscillator 2 is 127.
Tone for oscillator 2 is manually set to 71.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 127.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 271.44Hz (72) and is modulated by Note Vel, Voice Num, LFO 2, VCF Env.
LFO 2 direct modulation amount for low-pass filter cut-off frequency is 121. LFO 2 mod-matrix 3 modulation amount for low-pass filter cut-off frequency is 29.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 78.
Low-pass filter envelope amount is modulated by Note Vel, Voice Num, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Voice Num mod-matrix 7 modulation amount for low-pass filter envelope amount is 127.
Note Num direct modulation amount for low-pass filter envelope amount is 106.
Filter resonance is statically set to 44% (112).
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±10 cents (50).
Oscillators drift level is manually set to 10. Drift rate is 6
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 100.
Reverse Reverb fx
not yet complete
Delay & Reverb fx
not yet complete
Rack Amplifier fx
not yet complete
Phase fx
not yet complete
Mod Wheel modulator
Controls OSC 2 Level.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | OSC 2 Level | 127 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 106 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 78 |
| menu | VCF Envelope Velocity Sensitivity | 128 | |
| menu | VCA Envelope Velocity Sensitivity | 128 |
Voice Num modulator
Controls VCF Envelope, VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Envelope | 127 |
| timbre | fader-indirect | VCF Cut-off Frequency | 78 |
LFO 1 modulator
Controls UNKNOWN DESTINATION, OSC 1 Pulse Width Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| fx | matrix | UNKNOWN DESTINATION | 25 |
| timbre | matrix | OSC 1 Pulse Width Modulation Depth | 127 |
| name | value |
|---|---|
| LFO 1 Rate | 1.76Hz (130) |
| LFO 1 Delay / Fade | 3.64s (141) |
| LFO 1 Shape | Triangle |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
LFO 2 modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 121 |
| timbre | matrix | VCF Cut-off Frequency | 29 |
| name | value |
|---|---|
| LFO 2 Rate | 0.04Hz (0) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Sine |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 16.7s (212) |
| VCA Envelope Sustain Level | 82% (211) |
| VCA Envelope Release Time | 0s (0) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 0 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 78 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 32s (255) |
| VCF Envelope Sustain Level | 49% (125) |
| VCF Envelope Release Time | 1.49s (152) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 0 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |